Apollo PEX Lead-Free dezincification-resistant brass couplings are the premier low cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch clamps or stainless steel crimp sleeve (all sold separately). Available in a variety of configurations and sizes, completion of your next PEX piping system installation is easy with Apollo PEX fittings.
- Lead-free DZR brass
- Barb connection
- For use with PEX pipe
- Max. service temperature 200°F and max. pressure 200 psi
- Compatible with crimp ring or clamp connections
- Third party certified to NSF-pw Annex G
- Complies with ASTM F877 / Complies with ASTM F1807
- CSA B137.5
|APXC1238||1/2 in. X 3/8 in.|
|APXC121210PK||1/2 in. (10 Pack)|
|APXC1240JR||1/2 in. (40 Pack Jar)|
|APXC1234||1/2 in. X 3/4 in.|
|APXC3410PK||3/4 in. (10 Pack)|
|APXC3425JR||3/4 in. (25 Pack Jar)|
|APXC341||3/4 in. X 1 in.|
|APXBC1212||1/2 in. PEX x 1/2 in. PB|
|APXBC12125PK||1/2 in. PEX x 1/2 in. 1/2 in. PB (5 Pack)|
|APXBC3434||3/4 in. PEX x 3/4 in. PB|
|APXCPVC12||1/2 in. PEX x 1/2 in. CPVC|
|APXCPVC34||3/4 in. PEX x 3/4 in. CPVC|
Is it acceptable to couple PEX Tubing to Wirsbo Tubing using a PEX Brass Coupling and stainless steel pinch clamps
If the Wirsbo tubing is PEX-B or F-2159, then yes, you can couple it with PEX-B brass couplings and stainless steel pinch clamps. If it’s not PEX-B tubing, then no, you can’t couple it with PEX-B fittings and pinch clamps.
Where can we find the inner diameter of the fittings? Specifically the 3/4” coupling.
0.5335 inches is the inner diameter of the 3/4″ PEX-B Brass Coupling.
Is it safe to connect brass Pex fittings to galvanized steel without the risk of galvanic corrosion?
Apollo PEX fittings can be connected to galvanized pipe without corrosion as long as there is an ample amount of plumber’s tape between the fitting and the galvanized pipe.
Is there a 1″ Pex-B to 3/4″ sweat adapter?
No, we do not carry a 1″ PEX-B barb x 3/4″ sweat adapter.
Do you carry a 3/4″ pex-b barb x 1/2 inch sweat connector
No, we do not carry a 3/4″ PEX x 1/2″ Sweat adapter.
Can you expand the Pex B pipe to fit around a coupling?
No, PEX-B pipe cannot be expanded to fit around a coupling. A crimp ring, pinch clamp, or stainless steel sleeve must be used to secure fittings to PEX-B pipe.